Layer 2 Managed Switch

alvasta-tech.com / Enterprises / Planet / Planet Lan Switches / Layer 2 Managed Switch / WGSW-52040

WGSW-52040

WGSW-52040
L2+ 48-Port 10/100/1000Base-T + 4-Port 1000X SFP Managed Gigabit Switch


Key Features

Physical Ports

  • 48-Port 10/100/1000BASE-T Gigabit Ethernet RJ45
  • 4 1000BASE-X mini-GBIC/SFP slots
  • RJ45 to DB9 console interface for switch basic management and setup


IP Stacking

  • Connects with stack member via both Gigabit TP and SFP interfaces
  • Single IP address management, supporting up to 24 units stacked together


IP Routing Features

  • Supports maximum 128 static routes and route summarization
  • Supports maximum number of hops allowed for the RIP is 15


Layer 2 Features

  • Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard
  • Supports auto-negotiation and half-duplex / full-duplex modes for all 10BASE-T, 100BASE-TX and 1000BASE-T ports
  • Auto-MDI/MDI-X detection on each RJ45 port
  • Prevents packet loss flow control
    • - IEEE 802.3x pause frame flow control for full-duplex mode- Back-pressure flow control in half-duplex mode
  • High performance Store-and-Forward architecture, broadcast storm control, port loopback detect
  • 16K MAC address table, automatic source address learning and ageing
  • Supports VLAN
    • - IEEE 802.1Q tag-based VLAN- GVRP for dynamic VLAN management- Up to 256 VLANs groups, out of 4041 VLAN IDs- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)- Private VLAN Edge (PVE) supported- GVRP protocol for Management VLAN- Protocol-based VLAN- MAC-based VLAN- IP subnet VLAN
  • Supports Link Aggregation
    • - Maximum 128 trunk groups, up to 8 ports per trunk group- IEEE 802.3ad LACP (Link Aggregation Control Protocol)- Cisco ether-channel (static trunk)
  • Supports Spanning Tree Protocol
    • - STP, IEEE 802.1D (Classic Spanning Tree Protocol)- RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)- MSTP, IEEE 802.1s (Multiple Spanning Tree Protocol, spanning tree by VLAN)- Supports BPDU & root guard
  • Port mirroring to monitor the incoming or outgoing traffic on a particular port (many to many)
  • Provides port mirror (many-to-1)


Quality of Service

  • 8 priority queues on all switch ports
  • Supports for strict priority and WRR (Weighted Round Robin) CoS policies
  • Traffic classification
    • - IEEE 802.1p CoS / ToS- IPv4 / IPv6 DSCP- Port-based WRR
  • Strict priority and WRR CoS policies


Multicast

  • Supports IPv4 IGMP snooping v1, v2 and v3, IPv6 MLD v1 and v2 snooping
  • Querier mode supports
  • Supports Multicast VLAN Register (MVR)


Security

  • IEEE 802.1x port-based network access authentication
  • MAC-based network access authentication
  • Built-in RADIUS client to co-operate with the RADIUS servers for IPv4 and IPv6
  • TACACS+ login users access authentication
  • IP-based Access Control List (ACL)
  • MAC-based Access Control List
  • Supports DHCP snooping
  • Supports ARP inspection
  • IP Source Guard prevents IP spoofing attacks


Management

  • Management IP for IPv4 and IPv6
  • Switch Management Interface
    • - Console / Telnet Command Line Interface- Web switch management- SNMP v1, v2c, and v3 switch management- SSH/SSL secure access
  • BOOTP and DHCP for IP address assignment
  • Firmware upload / download via TFTP or HTTP protocol for IPv4 and IPv6
  • SNTP (Simple Network Time Protocol) for IPv4 and IPv6
  • User Privilege levels control
  • Syslog server for IPv4 and IPv6
  • Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events)
  • Supports ping, trace route function for IPv4 and IPv6